Daystate Red Wolf Service & Tuning

Expert in-house servicing, tuning and remapping for the Daystate Red Wolf electronic PCP, carried out by our own technicians.

Booking required — please contact us before sending, posting or dropping off any rifle.

Choose your service

• Remap / Tuning — a tailored remap to your pellet choice across High, Medium and Low power, with a full power report showing the previous and new settings. Sub 12 ft lbs rifles are tested to ensure the muzzle energy will not exceed 12 ft lbs across multiple pellet weights.
• Full Service — a complete strip, reseal and clean (see what's included below).
• Remap & Service — a full service and remap together in one package.

What's included in a full service

• Full O-ring replacement
• Internal clean, de-grease and re-grease
• Valve stem polish and new valve seat
• Power check and leak test

If we find any defective mechanical parts that need replacing, we will contact you first to discuss — this may incur additional cost. Please also tell us about any non-factory modifications made to the rifle's pressure-bearing parts.

Optional upgrade: Huma regulator fitment

The Red Wolf is not mechanically regulated from the factory — it uses Daystate's electronic MCT system, which controls valve timing electronically rather than with a traditional pressure regulator. This optional upgrade adds a mechanical regulator, delivering physically stabilised air pressure to the firing valve before the electronics take over. Benefits include:

• Tighter shot-to-shot consistency (lower ES / SD)
• More stable behaviour across the fill range
• Improved tune stability for precision shooting
• Reduced reliance on electronic compensation alone

This is a performance optimisation, not a correction — ideal for shooters chasing maximum consistency.

Cylinder conversion (Shed Wolf)

We convert your Red Wolf to the cylinder version and ensure it shoots the same speeds as supplied to us — or, if you choose the remap option, the rifle is fully remapped as above. Includes full cylinder conversion parts and a new valve seal, plus a clean and polish of the valve stem. Your carbon bottle is returned with the rifle. Turnaround 1–3 weeks, providing parts are in stock — please call or email first.

Calibre change kit & remap

We can convert your Red Wolf to another calibre and remap it to the correct values for maximum accuracy (sub 12 ft lbs only — for FAC, please contact us). Email or call us with your chosen calibre so we can order the parts in. Includes:

• New barrel
• New magazine
• Single-shot tray
• Pellet probe

What we need from you

• The pellets you shoot — for the most accurate map
• A fully charged battery
• Any muzzle device you use, and the factory single-shot tray
• Please remove any aftermarket single-shot loader — these can deform pellet skirts and affect accuracy
• Please do not send magazines — we do not need them

Turnaround

• Remap / Tuning — 3–8 working days
• Full Service — 1–3 weeks
• Remap & Service — 1–3 weeks

How it works

1. Contact us to book your service.
2. Get your rifle to us — see getting your rifle to us. Collection & return delivery can be arranged at extra cost.
3. We service, remap and prepare your full power report.
4. We return your rifle to you.

Note: we will do our best to get your rifle shooting through the same hole at 30 yds, but we cannot guarantee this every time due to natural variation between barrels.

Not the right model? See all our Daystate electronic rifle service & tuning options.